This US specification is applicable to all ballistic resistant materials (armour) intended to provide protection against gunfire, with the exception of police body armour and ballistic helmets, which are the topic of individual NIJ performance standards. The calibre of weapons are similar to that of the European EN1063 and US UL752 standard but have different categories which can be seen in the document to the right.
Architectural Armour offer a range of NIJ 0108.01 window and glass options. If you have any questions about your requirements, please feel free to email mailto:firstname.lastname@example.org or call us on +44(0)1981 257000 .
To view the products that can incorporate NIJ 0108.01 bullet resistant glass or have been tested to this standard see the below links .
Bullet Resistant Door Viewer A full range of bulletproof / Resistant Door Viewers / Peepholes / Spyholes BR4 to BR6
Bullet Resistant Windows Ballistic windows to resist bullets from 9mm Luger to 7.62 AP
Security Counters and Screens Physical, Ballistic or Blast resisting counters for any application to keep staff secure
Ballistic and Blast Resistant Guard Houses Modular New Build or Upgrading existing. EN1522/3 FB2 to FB7 , NIJ 0108.01 LII to IV UL 752
Bullet Resistant Doors A range of fully tested and certified ballistic single and double doors.
For our full range of technical specifications please click on relevant headings below;
EN 1063 Glass in Building - Security Glazing - Testing and Classification of Resistance Against Bullet Attack
UL 752 Standard for Bullet-Resisting Equipment
BS 5051 Bullet-resistant glazing - Part 1: for interior use- Part 2: for Exterior use
EN 1522/3 Windows, doors, shutters and blinds - Bullet resistance - Requirements and classification /Test method
GSA-TS01:2003 Standard Test Method for Glazing and Window Systems Subject to Dynamic Overpressure Loadings
EN 13541 Glass in building - Security glazing - Testing and classification of resistance against explosion pressure
EN 13123-2 Windows, doors and shutters - Explosion resistance - Requirements and classification
ISO 16933:2007 Glass in Building -- Explosion-Resistant Security Glazing -- Test & Classification for Arena Air-Blast Loading
UL 10C Positive Fire Pressure Tests of Door Assemblies
EN 1363-1 Fire resistance tests –Part 1: General Requirements
EN 1364-1 Fire resistance tests for non-load-bearing elements – Part 1: Walls
BS 476 Part 22 Fire tests on building materials and structures
EN 1634-1 Fire resistance and smoke control tests for door and shutter assemblies, openable windows and elements of building hardware
EN 1627 Pedestrian door-sets, windows, curtain walling, grilles and shutters - Burglar resistance - Requirements and classification
LPS 1270 Intruder Resistant Security Glazing - Requirements & Testing Procedures
LPS 1175 Requirements and testing procedures for the LPCB certification and listing of intruder resistant building components, strongpoints, security enclosures and free-standing barriers
EN 356 Glass in building - Security glazing - Testing and classification of resistance against manual attack.
LPS 1175 and 1270 Tool Categories Testing procedures for the LPCB approval
This is an extract not a full report and Architectural Armour Ltd accepts no liability for any loss, direct, indirect or consequential damage incurred by using this information, to the fullest extent permitted by law. You should make your own judgement as regards use of this document and seek out the full test standards.
Architectural Armour were commissioned to provide ballistic resistant products for a new armoury at a UK International Airport.
We read it all the time in the news headlines, multiple attackers arrive on stolen mopeds, dressed in black with helmets covering their faces smashing their way through glass shopfronts and glazed screens.